Polyvinyl chloride – a very good solution for the creation of pipeline systems for drinking water, and for aggressive environments. PVC pipes, PVC fittings and the corresponding valves are all the positive properties of the polymer. In the production of PVC pipes connecting the main polymer with dyes, fillers, lubricants and stabilizers, which are required according to the quality of the final product. Initial polymer mixture and the finished product – PVC pipe fittings conform to all quality standards.
BOW fittings
Specifications of PVC are well known, they include high chemical resistance and high stability of the material. These qualities of PVC pipes and fittings can be used in various industries. PVC pipes are not exposed to the majority of oxides and alkalis, aliphatic hydrocarbons, salts. This explains the longevity of the smooth operation of systems that are based on PVC pipes and fittings.
Canadian Company BOW has all the necessary conditions and production capacity for the production of PVC pipes in accordance with European standards. PVC pressure pipes are available in nominal length of 6 or 5 meters.
The bulk of the pressure pipe grade PVC BOW painted in gray color (RAL 7011). Blue tubes correspond to the standard WIS 4.31.06 and are used for transporting drinking water. Pipes standard KIWA 49 may be cream colored.
The special properties of this versatile device based on its carefully thought-out design. A specially designed tube Spiro has a very important function: firstly, it forces the dirt to settle and even the smallest particles of sludge into a special reservoir, and secondly, through the tube and air microbubbles rise from the water in the air chamber. The particles of sludge output from the drain valve. The air is discharged through the automatic vent valve. The system continues to operate.
1. Non-blocking vent.
2. Eyelet Hanger greatly facilitates installation.
3. The special construction of air chamber: dirt particles do not enter the vent, a large volume of air chamber prevents significant pressure fluctuations.
4. Drain valve for removal of large quantities of air when filling the system and remove contaminants.
5. Different versions of the connection: welding and flanged connections.
6. Slime does not affect the flow.
7. Rugged construction, designed for years of operation.
8. Unique tube Spiro. This piece was designed for optimal separation of air and dirt.
9. No need for frequent removal of dirt because of the large volume of the chamber.
10. The drain valve for sludge
As Radiant element in the system PEX warm floor uses PEX tubing. The floor temperature sensor is fixed and regulated by thermostat.
PEX warm floor is used for heating of various types of industrial and residential premises and premises of social and cultural sphere.
The principle of PEX warm floor
As a result of the system the entire surface of the floor or wall into a large working panel, evenly radiating heat. The temperature of the floor only a few degrees higher than the temperature of air, which creates a soft, perfectly comfortable for a man heating.
Electric warm floor system can be arranged:
- Using Radiant PEX tubing
- Using Radiant electric mat
PEX tubing – a basic element PEX warm floor. In fact, it is a conductor with high resistance, which is heated when passing through a PEX current.
PEX tubing, packed in heat-resistant plastic mesh and fixed on it fixing tape is a warm mat.
